In order to give an impetus to the GoI’s “Make in India” campaign, a dedicated department of Indigenisation was set up in November 2015 along with a road map for indigenisation till the year 2030. The road map provided a flow chart depicting the entire indigenisation process and included a list of systems, equipment and items along with the necessary technical details which were to be indigenised.
MDL have successfully indigenised certain equipment such as sonar dome, ship installed chemical agent detection system, bridge window glass, main batteries for Scorpene submarines, multiple cable transit glands and remote controlled valves with various companies on a no cost no commitment basis.
MDL have also introduced an indigenization clause in all our tenders where bidders have to indicate their progressive indigenization plan. The indigenous content in warships built by us has increased in the past five years
MDL had also been assigned 40.52 acres of land by the Government of Kerala for setting up the National Institute of Warship/ Submarine design and Indigenisation Centre which is currently being used as a head office of National Institute for Research and Development in Defence Shipbuilding. Increase in indigenisation has enabled us to reduce our reliance on third party component manufacturers and the cost of construction for our vessels.
Mazagon Dock Shipbuilders Limited (MDL) is one of India’s leading DPSU shipyard under Ministry of Defence with prime focus on construction of Warships & Submarine. MDL is committed to be part of “Start-up India” initiated launched by Government of India to encourage entrepreneurship & promote innovation.
As a first step, MDL has identified items / services which can propel the Start-ups to start their business & be a part of MDLs supply chain. Thereby, Start-ups need not meet qualification criteria related to prior experience – prior turnover while participating in MDL tenders wherein part quantities would stand reserved for them with the understanding that other commercial, technical & quality parameters stands met.
| S. No. | Item Description |
|---|---|
| 1 | Hacksaw Blade |
| 2 | Punch, Wrench, spanner and Screw Driver |
| 3 | All types of Grinding Wheels |
| 4 | Measuring Tape, Scales, Pressure Gauges and Filler Gauges |
| 5 | Personal Protective Gears (Helmet, Safety Belt, Ear Plug, Liner Hood, Grinding and Face Shield). |
| 6 | Cotton Face Cover & Particulate Respirator |
| 7 | Welding Goggles & Glasses. |
| 8 | Leather Hand Gloves & Leather Spats |
| 9 | Gas Cutting Nozzles |
| 10 | Various Lamps & Tube Lights |
| 11 | Terry Towel, Duster & Household Cloth |
| 12 | A3 & A4 size copying papers |
| 13 | Soft & Liquid soap and cleaning powder |
| 14 | Disposal Garbage bags. |
| 15 | Rubber Hose pipes |
| 16 | Plastic (PVC) Pipes |
| 17 | HDPE Tarpaulins of various sizes |
| 18 | Fasteners of various sizes |
| 19 | All types of Brushes |
| 20 | Ball Bearing of various sizes |
| 21 | General Purpose Paint |
| 22 | Plywood of various size and thickness |
| 23 | Plates, Sections, Pipes, Rounds, Half Round and Sq. Bar (other than DMR steel for Shipbuilding) |
| 24 | Angles and Channels (other than DMR steel) |
| 25 | Hull Erection Aids |
| 26 | Rigging items |
| 27 | Steel Wire ropes |
| 28 | Wood for launching arrangement and in plant items |
| 29 | Fenders |
| 30 | Tally Plates |
| 31 | Crest |
| 32 | Castings and Forgings |
| 33 | NBCD Lockers |
| 34 | Fire Fighting items |
| 35 | Night Vision binoculars and goggles |
| 36 | Weather Deck item covers |
| 37 | Ship’s Bell |
| 38 | Pipes – steel |
| 39 | Flanges – steel |
| 40 | Sleeves |
| 41 | Pipe clamps |
| 42 | Gaskets |
| 43 | Scupper heads |
| 44 | Chock-fast Material |
| 45 | Corrosion Protector |
| 46 | Deck/Bulkhead Piece |
| 47 | Pressure & Compound Gauges |
| 48 | Heat Resistant Al. Paint |
| 49 | Necol Lacquer Paint for A/V Paint |
| 50 | MS Pad with GM Sleeve for Emergency Hose Connector |
| 51 | Tank Calibration Plate |
| 52 | Nylock Nut |
| 53 | Al. Sheet for Cable Tray and Bends |
| 54 | Cable Tray Support |
| 55 | Cable Hanger and accessories |
| 56 | Al. Sheet for cable clip and tie |
| 57 | MS Pipes and sleeves for De-gausing |
| 58 | Sleeves/Heat-shrink sleeves |
| 59 | Tape & Tubing |
| 60 | NWT Cable Glands |
| 61 | Hangar/NWT Cable Gland Packing material |
| 62 | EN Block Putty |
| 63 | Single Deck & BHD Glands (MS), MS Glands with connectors and conduit adaptors, connectors and conduit adaptor for single Dk. Tubes & BHD Glands |
| 64 | Cable Conduit and accessories |
| 65 | MS Galvanised Pad / Lug for installation, Earthing Pad / Stud |
| 66 | Mounting Plate for Lighting |
| 67 | Lamps (LED/CFL/Fluorescent/Incandescent) and Tube Lights. |
| 68 | Neoprene flexible tube 1” for mag light fitting patt. No. 0581/456-1511 |
| 69 | Office computer and accessories |
| 70 | Recreation items |
| 71 | Sports items |
| 72 | Neoprene Rubber Sheet |
| 73 | Horning equipment |
| 74 | Adhesive tapes |
| 75 | Anti-corrosion paints |
| 76 | Stowage boxes |
| 77 | Wood elements |
| 78 | Stability leads |
| 79 | Electrical appliances |
| 80 | Labeling Materials |
| 81 | Accommodation furniture |
| 82 | Gratings |
| S. No. | Description of Service |
|---|---|
| 1 | Cleaning of MDL surrounding areas |
| 2 | Gardening Jobs within and outside MDL |
| 3 | Binding of documents & Manuals |
| 4 | Printing & photocopier |
| 5 | Pest Control (Building, Workshops & Onboard) |
| 6 | Cleaning of Linens |
MDL is committed to indigenise equipment and systems on our warships& submarines, in pursuance of the Government’s “AtmaNirbhar Bharat” and “Make in India” campaigns.
We intend to increase the quantum of indigenised components on our warships and submarines in order to give an impetus to the Government of India’s “AtmaNirbhar Bharat” and “Make in India” campaigns. In the past, we used to import engineering and weapon equipment and systems for warships & submarines built in India.Importing such equipment and systems resulted in increased costs and dependence on foreign OEMs.
In order to address these issues, a dedicated department of indigenisation was set up at MDL in November 2015 and a “Make in India” page placed on our website. This is being augmented and expanded to support the “AtmaNirbhar Bharat” initiative of Government of India.
MDL supports AtmaNirbhar Bharat initiatives through following avenues:
MAKE IN INDIAArranging to manufacture imported equipment & systems in India, in collaboration with foreign OEMs & Indian Industry for use onboardIndian ships &submarines, and for export.
INDIGENISATIONSupporting the Indian Navy& Coast Guard in their indigenisation effort by identifying Indian OEMs and guiding them to develop and manufacture items to replace imported products.
MAKE-IIIdentifying products and guiding Development Agencies without funding for prototype development, but with assurance of orders on successful development and trials of prototype.
INDICATIVE PROCESS FLOW
ITEMS ALREADY INDIGENISED
EXPRESSIONS OF INTERESTS(EOI’s) PROMULGATED
Expressions of Interest placed on MDL website for items to be developed through Indian Partners.
RTI
